82000 Monitor Part # AS12782

• Offered on select 115, 2115, 2155 air seeders
• May be confused with the 101 monitor - check bottom right corner of face plate
• Displays fan RPM & low bin alarm

70000 Monitor Part # AS12781

• Offered on select 180, 155, 135 air seeders

132 Monitor Part # AS12754

• Offered on 2130, 2135, 2155, 3165 & 3195 air seeders
• Displays acres / ground speed / calibration

101 Monitor Part # AS12751

• Offered on 2115, 2115sp, 2130, 2135, 2155, 2195, 3165 & 3195 air seeders
• Displays fan RPM / shaft stop alarm / low bin alarm

198 Monitor Part # 3120-41-01

• Offered on 2130, 2135, 2155 & 3165 air seeders
• Displays acres / calibration

149 Monitor Part # 3120-50-02

• Offered on 2135, 3165, 3170, 3195 & 3225 air seeders

149 Module Part # 3120-50-01

• May be used in conjunction with the 149 Monitor
• Typically located under fifth wheel plate

277 Module Part # 3120-65-12

• Offered on 2130, 2135, 2155, 3170, 3195, 3200, 3225, 4000 Series & 5000 Series air seeders
• Uses "Mux Bus" wiring system
• White = Power (12v)
• Black = Ground
• Green = Data

Model 491 Monitor

Part # 3130-20 (v2.02)

Part # 3130-21 (High Power)

• Offered on 3170, 3200, 3225, 4000 Series, 5000 Series, and 6000 Series air seeders. The high power version is also available on 6000 Series Air Seeders.
• The regular and high power monitors can be differentiated between by noting the designation of "HP -High Power" on the faceplate.
• The high power monitors are required for units with full run optical blockage sensors.

Model 591 Air Seeder Monitor

• Offered on the 6000 Series Air Seeders
• The Model 591 Monitor provides standard monitoring features for up to four bins.
• The 591 Monitor can be easily interchanged with the previous 491 Deluxe Air Seeder Monitor.

• Monitor air seeder statistics, including fan speed, application rate, bin levels, area seeded, & ground speed.
• The large screen will allow you to monitor up to eight functions on one page.
• Four pages are available to customize. You can easily toggle between each page to monitor functions on each page.
• Case drain pressure is monitored to help prevent costly hydraulic fan motor damage.
• Available with optional Cab Rate Adjust and Zone Rate Control to adjust application rates on the go.
• Available with optional Fan Controller.
• Four level bin level sensors.

ZYNX X15 / Bourgault SRC System Part # 3131-00

• Offered on 6000 Series & select 5000 Series air seeders.
• The ZYNX console is a Windows based computer system contained within an ABS housing.
• 6.4" VGA touch screen display and a stylus pen is included for making screen selections.

• Interfaces - 4 x Serial Ports; 2 x USB Ports; PS2 Port; LAN Port; Canbus (harness)
• The console is supplied with the Bourgault SRC and ZYNX Guidance programs installed. Optional software can be added for other applications.
• ZYNX Monitor / Control System requires specific sensors and harnesses, including an ECU module located on the air seeder frame.

Topcon X20 / Bourgault SRC System

• Offered on 6000 Series air seeders
• Windows XP Professional operating system
• 8.4” (21.3cm) colour touch screen, 800 x 600 pixel dimensions

• Interfaces - 4 x RS232 Serial ; 4 x USB 2.0 Ports; 1 x 10/100 Base T Ethernet Port (RJ45)
• 1GHz processor, 2Gb hard drive, & 512Mb of RAM
• Single run blockage monitoring for both single and double shoot air seeder kits
• All sensors, clutches, and actuators connected to a central control box (ECU) on the air seeder, with a single harness from it to the monitor in the tractor cab