1
Superior Piston Seals
The hydraulic cylinder is equipped with double u-cup piston seals which offer excellent protection from internal leakage caused by wear or contamination.
2
Extended Life Arm Pivots
The arm pivots are equipped with needle bearings and hardened grease-able pins to ensure a long service life.
3
Land Following ParaLink™ Control
The ParaLink™ design maintains the attack angle of the fertilzer knife in the ground as the arm follows the ground profile, resulting in consistent soil flow and superior placement, even in rough soil conditions.
4
Indexed Seed Depth Adjust
Depth is set at 1/6" increments from position 1 to 15 for a total range of 2½". Position 4 is a suggested starting position, but must be verified by the operator if desired seeding results are being achieved.
5
Dedicated Seed Knife
The ½" wide dedicated seed knife is equipped with carbide tips to ensure long life even in abrasive conditions. The seed knife position can be adjusted independently to the fertilizer knife.
6
Dedicated Fertilizer Knife
The fertilizer knife places product into the soil ahead of the seed knife. In good seeding conditions, operators can achieve 1½" horizontal and 1½" vertical separation between each row.
7
Packer Wheel Choice
You can choose a packer wheel that best suits your choice of knife.
8
Bolt-On Packer
Packer wheels can be quickly changed in the field. Get seeding again in a matter of minutes!
9
Quick Hydraulic Response
A 1¼" diameter cylinder delivers quick lifting in the headlands and reduced hydraulic demand.
10
Seed Knife Adjustment
The seed knife is factory set to deposit ¾" above and 1½" to the side of the fertilizer knife. The PLDS allows you to adjust the seed opener in relation to the fertilizer. Vertical: up to +/- 1½" | Horizontal: 1½", 2", 2½", & 3"