2. Apollo Troubleshooting

Detailed demonstrations of tracing the schematics for Apollo systems for both Trailing and Leading seeding systems.

This class provides 4 lessons with detailed demonstrations of tracing the schematics for Apollo systems for both Trailing and Leading seeding systems.  Please watch the videos in the sequence below, then follow the link at the bottom of the page to a short quiz on the topics covered in this class.

Videos

1. Tow Behind Can Hi-Lo - Drawings (14:57)
Following Can Hi-Lo on drawings from Monitor to end of signal for Tow Behind (Trailing) air seeders. 

2. Tow Between Can Hi-Lo - Drawings (13:51)
Following Can Hi-Lo on drawings from Monitor to end of signal for Tow Between (Leading) air seeders. 

3. Can Hi-Lo Pin Out's & Locations - Harnesses (11:00)
Follow through with harnesses layed out and explain the pins and locations of the pins to be checked 

4. High Current Power Supply - Drawings (12:49)
Following through the drawing to trace the power supply 

5. Apollo High Current Power Supply - Harnesses (10:13)
Follows through with harnesses laid out and explain the pins and locations of the pins to be checked. 

6. Safety Switch Wiring 
Drawings that follow the Safety Switch wiring through in PDF format. 

7. Can Hi-Lo PDF with Troubleshooting Flowchart
Drawings that follow the Can Hi-Lo signal through in PDF format. 

8. Apollo Power PDF with Troubleshooting Flowchart
Drawings that follow the Apollo power through in PDF format. 

9. Red Error Codes (9:13)
How to use the Red Error code messages to simplify troubleshooting. 

Quiz

After completing the lesson videos above, click on the appropriate link to begin a short exam on the topics covered in this class